OSHA 30-Hour Construction Safety

Elevate your safety expertise with our OSHA 30-Hour Construction course. This comprehensive training program provides a deep dive into the critical safety principles and regulations specific to the construction industry.  

  • OSHA-Authorized Outreach Training Program
  • Print Your Certificate of Completion Immediately
  • Offers 3 Continuing Education Units (CEUs)
  • Receive Your Official OSHA DOL Card As Soon As 2 Weeks
     
SVG
1st Authorized OSHA Outreach Provider
SVG
100% Online At Your Own Pace
SVG
OSHA DOL Card As Soon As 2 Weeks
SVG
Interactive and Engaging

About This Course s-mod-info

AdvanceOnline Solutions is one of the few companies authorized by OSHA to provide online courses for OSHA’s Outreach Training Program. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926.

The OSHA Construction Industry Outreach Training Program is intended to provide an entry-level construction worker with a general awareness of hazards and how to recognize and prevent those hazards from occurring on a construction site. Training emphasizes hazard identification, avoidance, control, and prevention.  

This online OSHA 30-Hour Construction Safety course is provided for your individual use by AdvanceOnline Solutions and is intended to provide instruction on a variety of general construction safety and health standards.  

Note: OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.

Once you successfully complete the course and the required course survey, you receive: 

  • A Certificate of Completion that you can immediately download and print. Per OSHA, the Certificate of Completion may be used to verify training prior to receiving your OSHA DOL Card. 
  • Your OSHA DOL Card, sent directly to you as quickly as two weeks. NOTE: please ensure your mailing address is accurate to avoid delivery delays.
  • Three (3.0) Continuing Education Units (CEU).

Course topics include:  

  • Introduction to OSHA 
  • Workers’ rights & responsibilities
  • Employer and supervisor responsibilities
  • When and how to file a complaint
  • Managing Safety and Health
  • How to identify hazards such as: 
    • Struck-by hazards 
    • Caught-in or between hazards
    • Electrical hazards
    • Fall hazards
  • How to identify, select, and use Personal Protective Equipment (PPE)
  • How to identify major construction health hazards
    • Hearing Conservation
    • Respiratory Protections
    • Lead and Crystalline Silica
    • Asbestos
    • GHS Hazard Communication
  • Hand and Power Tool Safety
  • Ladder safety
  • Excavation safety around trenches and how to take responsibility
  • Scaffold identification and safety
  • Crane, rigging, and mechanical equipment safety
  • Heavy Equipment hazards
  • Forklift Safety
  • Materials handling safety
  • Permit-Required Confined Space Entry - how to identify, the hazards, and duties and responsibilities
  • Fire Safety
  • Welding and Cutting hazards
  • Concrete and Masonry hazards
  • Steel Erection hazards
  • Ergonomics 

Audience

AdvanceOnline Solutions’ OSHA 30-Hour Construction Safety course is intended for construction workers, supervisors, individuals with site safety responsibilities, and anyone who needs a DOL OSHA-30 Hour Card to gain or maintain employment in the construction industry. Examples of construction jobs include carpenters, electricians, laborers, masons, plumbers, sheet metal workers, tile workers, and welders. 

Individuals who take this course include:

  • Construction workers
  • Construction supervisors
  • Foremen on small and large construction sites
  • Construction site inspectors
  • Any and all employees that are responsible for construction areas, projects, or tasks?
  • If you work on a publicly funded job site in one of the following states, completing the OSHA 30-Hour Construction Safety course or the OSHA 10-Hour Construction Safety course satisfies the state requirements:?
    • Connecticut (must recertify every 5 years)
    • Massachusetts?(must recertify every 5 years)
    • Missouri
    • Nevada
    • New Hampshire
    • New York
    • Pennsylvania (Philadelphia)
    • Rhode Island
    • West Virginia

If you work in New York City and are looking to meet the requirements for your SST certification, you will need to register for the OSHA 30-Hour Construction Safety (Proctored) course or the OSHA 10-Hour Construction Safety (Proctored) course. Both of these courses use biometric proctoring to meet the NYC Department of Buildings requirement for proctored courses.

We also offer the OSHA 10-Hour General Industry Safety course for those who work in Manufacturing, Distribution, Healthcare and many other industries that require General Industry training.

If you have any question about which course you should take, please call our Customer Care team at 713-952-1100, or Contact Us online.

Learning Outcomes

After taking this course, you will be able to:

  • Explain the importance of OSHA in providing a safe and healthful workplace to workers covered by OSHA
  • Recognize how management plays a role to create a healthy and safe work environment through safety and health programs, worksite analysis to identify potential hazards on site, and levels of controls used to control exposure to hazardous materials and situations
  • Identify the struck-by and caught-in or caught-between hazards associated with serious construction-related injuries
  • Recognize the appropriate PPE to use based on a workplace evaluation and the types of hazards present
  • Identify the appropriate hearing protection for your workplace based on the hazards of excessive noise, the types of noise, the results of a noise-monitoring program, and the OSHA rules for hearing protection
  • Identify the appropriate respiratory protection for your workplace based on the types of airborne contaminants, the functions of different respirators, and the OSHA rules for respiratory protection
  • Identify hazards posed by lead and crystalline silica in construction and how to control and avoid them
  • Recognize the hazards of asbestos and identify ways to stay safe as you work in and around asbestos, including monitoring, communication, training, medical surveillance, PPE, and engineering controls
  • Identify the elements of the Hazard Communication Standard, identify physical and health hazards of chemicals included on a Hazardous Chemical Inventory, recognize the information required on Safety Data Sheets (SDS) and warning labels, as well as how they are used and maintained, and the meaning of pictograms, under the Globally Harmonized System (GHS), and identify training program requirements
  • Identify safe work practices for electricity, including recognizing electrical terms, basic electrical safety principles, and electrical safety regulations
  • Recognize the safety hazards associated with non-powered hand tools and identify hazards related to powered hand tools
  • Recognize types of fall hazards and how to prevent falls in your work environment by using appropriate fall protection
  • Recognize ladder hazards, types of ladder-related injuries, and how to select, inspect, and maintain ladders
  • Identify the dangers involved in excavations and the safe work practices for employees working in or near trenches and excavations
  • Recognize the types of scaffolds and how to safely use them
  • Identify the safety requirements for working with or near cranes, including how to avoid accidents and how to recognize hazards
  • Recognize the safe work practices for working with or near heavy equipment
  • Recognize safe operating procedures for forklifts, workplace hazards, and how to handle special types of forklifts
  • Identify how to properly use, maintain, store, and dispose of materials
  • Identify a confined space, its hazards, the OSHA requirements for confined spaces, and the duties and responsibilities of confined space workers
  • Identify methods of fire prevention and describe OSHA requirements for fire protection
  • Outline the general safety requirements for welding and cutting and list the safety precautions
  • Identify the OSHA safety requirements for construction operations involving concrete and masonry
  • Recognize the OSHA safety requirements for steel erection activities
  • Recognize the role ergonomics plays in helping construction workers avoid work-related MSDs and identify how to avoid on-the-job injury when performing different types of activities.

Syllabus

Lesson exams are conducted after the completion of each lesson. Students are required to complete each exam after completing each lesson. This allows students to take the corresponding exam while the information is still fresh.

Each exam consists of 10 questions randomly selected from a large pool of questions. A score of 70% or better is required to pass each exam. Participants are given 3 opportunities to pass the examinations and will receive immediate feedback.

LessonLesson Title
1Course Overview
2Introduction to OSHA
3Managing Safety and Health
4Struck and Caught Hazards
5Personal Protective Equipment
6Hearing Conservation
7Respiratory Protection
8Lead and Crystalline Silica
9Asbestos
10GHS Hazard Communication
11Electrical Safety
12Hand and Power Tools
13Fall Protection
14Ladder Safety
15Excavations
16Scaffolds
17Crane Safety
18Heavy Equipment
19Forklift Safety
20Materials Handling
21Permit-Required Confined Spaces
22Fire Safety
23Welding and Cutting
24Concrete and Masonry
25Steel Erection
26Ergonomics
27Final Exam

Requirements 

This OSHA 30-Hour Construction Safety course (OSHA 29 CFR 1926) provides critical and important training for construction workers, construction supervisors, and any individual that needs to be aware of workplace safety on large and small construction sites. AdvanceOnline Solutions’ easy-to-use online environment affords you the flexibility and convenience to complete the course anytime, anywhere.

Upon successful completion of this OSHA 30-Hour Construction Safety course, you’ll receive a Department of Labor (DOL) OSHA 30-Hour Card.  Employers can verify your valid DOL OSHA card by scanning the unique QR code on the back of the card or by contacting AdvanceOnline at 713-952-1100.  

Most employers require completion of the OSHA 10-Hour Construction or OSHA 30-Hour Construction Outreach training to access the jobsite. This DOL OSHA card verifies that you have the required knowledge to satisfy the employer’s safety training program requirements. Our goal at AdvanceOnline is to provide the necessary safety training you need to seek or maintain employment in the construction industry.  Each student will be able to recognize, avoid, reduce, or prevent safety and health hazards while working on a construction site.  

Each student must fulfill the following requirements to earn a Certificate of Completion for the OSHA 30-Hour Construction Safety course: 

  • Adhere to the Honor Code to complete the training yourself 
  • Complete all required course laboratory exercises, you can save your progress as you go 
  • Pass all lesson examinations and the final exam with a score of 70% or better. Participants are given 3 opportunities to pass the examinations and will receive immediate feedback. 
  • Spend 30+ hours in the training course over a 4-day period. OSHA limits all OSHA Outreach Training (classroom and online) to a maximum of 7.5 hours training per day in all OSHA 30-Hour courses. As a result, all 30-Hour courses must be delivered over a minimum of four days. 
  • Complete all training within 180 calendar days of the course start date.
  • Only access the OSHA Outreach training within U.S. Jurisdiction. 
  • Complete the course survey  

Occupational Safety and Health Administration (OSHA)  
(800) 321-OSHA  
https://www.osha.gov 
200 Constitution Avenue 
Washington, D.C.  20210 

Course Facts

DOL Icon

What You Get

Official DOL card – shipped as soon as 2 weeks

Who Icon

Who Should Take the Training?

Supervisors and managers in construction

Game Icon

Course Gamification

Dynamic course design with engaging games and quizzes

Access Icon

Course Access

Courses available 24/7 on any device

Standards Icon

Standards Covered

OSHA 29 CFR 1926

Structure Icon

Course Structure

At your own pace, save progress as you go

Chat

Support

Support available by email, phone, or chat

Update Icon

Course Update

Content is updated and current

Frequently Asked Questions

What is an OSHA DOL card?

The official OSHA DOL Card is a plastic, wallet-sized card issued after the successful completion of an accepted OSHA Outreach program course. AdvanceOnline currently offers the OSHA 10-Hour Construction Safety course, the OSHA 30-Hour Construction Safety course, and the OSHA 10-Hour General Industry Safety course. The OSHA DOL Card is commonly referred to as an OSHA Card or a Completion Card. Please note that only students within OSHA's jurisdiction (the 50 States and certain U.S. Territories) may receive a DOL card.

How do I get an OSHA DOL card?

You will receive your plastic official OSHA DOL card as soon as two (2) weeks after you complete your OSHA Outreach course and survey. The card is mailed via USPS First Class to the mailing address in your account profile.

Once you successfully complete the course a pop-up will appear and you can print or download the certificate of completion to your computer, smartphone, or tablet. While you're waiting for your DOL card to arrive, you can use the certificate of completion as proof you have successfully completed the course.

What are the OSHA Outreach Program courses?

OSHA implemented an Outreach Training Program that has proved highly successful in reducing the number of on-the-job accidents. According to OSHA, the Outreach Program is their "primary way to train workers in the basics of occupational safety and health". Our OSHA 10- and 30-Hour Construction Safety or OSHA 10-Hour General Industry courses are online versions of OSHA's successful program. The courses are designed to provide instruction on a variety of construction safety and health standards.

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job.
AdvanceOnline is the first of only eight authorized providers of OSHA's Online Outreach Training program.  Visit OSHA's site, OSHA-Authorized Online Outreach Training Providers. to learn more

What topics are covered in the OSHA 10-Hour General Safety course & who should take it?

The OSHA 10-Hour General Industry Safety course is intended for all employees.

Course topics include:  

  • Introduction to OSHA 
  • Workers’ rights & responsibilities 
  • Employer and supervisor responsibilities 
  • When and how to file a complaint
  • How to identify hazards such as:
  • Slips, trips, falls associated with walking and working surfaces
  • Workplace Fires and Emergencies
  • Electrical hazards
  • How to identify, select, and use Personal Protective Equipment (PPE)
  • GHS Hazard Communication and chemical hazards
  • Bloodborne Pathogens
  • Permit-Required Confined Space Entry - how to identify, the hazards, and duties and responsibilities
  • Lockout/Tagout procedures
  • Forklift Safety 
What topics are covered in the OSHA 10-Hour Construction Safety course & who should take it?

The OSHA 10-Hour Construction Safety course is intended for construction workers and supervisors, and anyone involved in the construction industry.

Course topics include:  

  • Introduction to OSHA 
  • Workers’ rights & responsibilities
  • Employer and supervisor responsibilities
  • When and how to file a complaint
  • How to identify hazards such as:
  • Struck-by hazards
  • Caught-in or between hazards
  • Electrical hazards
  • Fall hazards
  • Ladder safety
  • Excavation safety around trenches and how to take responsibility
  • Scaffold identification and safety
  • Materials handling including hand and power tools
  • Crane, rigging, and mechanical equipment safety
  • How to identify, select, and use Personal Protective Equipment (PPE)
  • Permit-Required Confined Space Entry - how to identify, the hazards, and duties and responsibilities  
What topics are covered in the OSHA 30-Hour Construction Safety course & who should take it?

The OSHA 30-Hour Construction Safety course is intended for construction workers and supervisors, and anyone involved in the construction industry.

Course topics include:  

  • Introduction to OSHA 
  • Workers’ rights & responsibilities
  • Employer and supervisor responsibilities
  • When and how to file a complaint
  • Managing Safety and Health
  • How to identify hazards such as: 
    • Struck-by hazards 
    • Caught-in or between hazards
    • Electrical hazards
    • Fall hazards
  • How to identify, select, and use Personal Protective Equipment (PPE)
  • How to identify major construction health hazards
    • Hearing Conservation
    • Respiratory Protections
    • Lead and Crystalline Silica
    • Asbestos
    • GHS Hazard Communication
  • Hand and Power Tool Safety
  • Ladder safety
  • Excavation safety around trenches and how to take responsibility
  • Scaffold identification and safety
  • Crane, rigging, and mechanical equipment safety
  • Heavy Equipment hazards
  • Forklift Safety
  • Materials handling safety
  • Permit-Required Confined Space Entry - how to identify, the hazards, and duties and responsibilities
  • Fire Safety
  • Welding and Cutting hazards
  • Concrete and Masonry hazards
  • Steel Erection hazards
  • Ergonomics 

Quantity
169.00
159.99
Quantity

Need a Replacement OSHA DOL Card?

To qualify for a DOL card replacement, you must meet all the conditions below:

  • You enrolled in OSHA 10-Hour or 30-Hour training through AdvanceOnline 
  • You successfully passed the OSHA 10-Hour or OSHA 30-Hour course within the last 5 years
  • You've never received an OSHA replacement card from 360training before

NOTE: Per OSHA regulations, you're only allowed one replacement card in case of loss or damage. To get an additional card, you will need to complete the DOL Card training requirements again.

Request a Replacement

AdvanceOnline is accredited by the International Accreditors for Continuing Education and Training (IACET) and offers IACET CEUs for its learning events that comply with the ANSI/IACET Continuing Education and Training Standard.  IACET is recognized internationally as a standard development organization and accrediting body that promotes the quality of continuing education and training.